About Semi-amateur

Semi-amateur · 10-23-2023

Hi, I just update firmware to the latest with my asa5555-x. Appliance works otherwise, but I get the following two errors on boot: IPS module is no longer supported and was prevented from booting Consider uninstalling the unsupported IPS module with ...

Semi-amateur · 10-19-2023

I'm trying to forward wan interface port 9982 to internal ip 192.168.1.20 port 9982 but I get packet drop: "Flow is denied by configured rule". I tried to set the following config: ! object network SERVER host 192.168.1.20 ! object service SERVICE_...

Semi-amateur · 10-17-2023

Hi! I have a C899G 4g ISR router that I'd like to use as a 4g modem/bridge for the asa 5555-x that I recently got my hands on. I have tried searching but found no clues about how I could "bridge" the Cellular0 interface to ethernet port of the C899G ...

Semi-amateur · 10-05-2023

Hi! I have a C899G-LTE-GA-K9 device in my homelab. In the front panel it shows status leds for PoE functionality but those leds never turn on and no poe devices get power from the four back ports labeled PoE.Also the device does not recognize any poe...

Semi-amateur · 10-23-2023

Thanks, basic firewall functionality is really all I need. Value on this device was amazing, bought this for 40$.BTW does the HA configuration still work without those modules if I find another ASA5555-X?

Semi-amateur · 10-23-2023

I'm using just that version:asa# sh ver Cisco Adaptive Security Appliance Software Version 9.14(4)23 SSP Operating System Version 2.8(1.200) Compiled on Wed 15-Feb-23 19:58 GMT by builders System image file is "disk0:/asa9-14-4-23-smp-k8.bin" Confi...

Semi-amateur · 10-23-2023

Thanlks for the reply, here is output of sh module:asa# sh module Mod Card Type Model Serial No. ---- -------------------------------------------- ------------------ ----------- 0 ASA 5555-X with S...

Semi-amateur · 10-19-2023

No, I have not configured any access-group on wan interface, I'm trying to follow tutorials and those that I found did not include any such stuff.

Semi-amateur · 10-19-2023

The problem seems to be with the asa port forwarding, I do get those packets to the wan interface but asa won't let them in, made a new topic from this: https://community.cisco.com/t5/routing/asa5555-x-cannot-get-traffic-to-pass-through-port-forwardi...

Member Since	‎10-05-2023 09:20 PM
Date Last Visited	‎10-19-2023 07:32 AM
Posts	18
Total Helpful Votes Received	1

User Statistics

User Activity

ASA5555 software modules not supported and cannot uninstall

ASA5555-x cannot get traffic to pass through port forwarding

C899G as transparent bridge for asa 5555-x

C899G not recognizing any PoE commands

Re: ASA5555 software modules not supported and cannot uninstall

Re: ASA5555 software modules not supported and cannot uninstall

Re: ASA5555 software modules not supported and cannot uninstall

Re: ASA5555-x cannot get traffic to pass through port forwarding

Re: C899G as transparent bridge for asa 5555-x