Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello, I have to establish several VPN tunnels between different sites, all equipped with the above devices, the RVL is the point, there is one PC behind, that has to download and run an application. I can establish the tunnel with no errors in the l...
Hello,I have to establish several VPN tunnels between different sites, all equipped with the above devices, the RVL is the point, there is one PC behind, that has to download and run an application. I can establish the tunnel with no errors in the lo...
Hello,I'm sure, the problem is not a big one, however I'm stuck for now.I managed to configure an ASA 5505 under home circumstances, with ADSL internet connection. All went smooth, I could rease the internet, and could reach the device from the inter...
Hello,Please note, that I'm a newbie in Cisco networking. Just started with an ASA 5505 an can get quite well with it, except that I want to upgrade the ASA and the ASDM. I understand that the versions of the 2 are interconnected with each other.The ...
Thanks ebreniz for your suggestion.I issued the command, but that does not seem to change anything, even after disconnecting and reconnecting the tunnel.
Hello,I have only the global line, but the working only had the nat line, nothing else.Do I really need the above 2, you mentioned?If so, which IP and mask - IP and mask do I need?Thanks again!
