Hi, Where I can read  the explanation about JSON body for MSE API responses? i.e. "currentlyTracked", "confidenceFactor", "isGuestUser", "dot11Status", "floorRefId" etc thanks in advance Sotirios Metaxas ... View more

Hi, We are a mobile app development team. We are trying to develop an app with Cisco MSE infrastructure.  We are facing a problem with the latency and accuracy for positioning of mobile devices. The infrastructure consists from: Prime Infrastructure 3.0 MSE 8.0 If you could help us on the below questions: How to improve the Location Accuracy and the Latency of MSE? Is there any best configuration for MSE / PI or Controller to improve the above characteristics? Please, attach the appropriate document for any solution. Thanks & Regards, Sotirios ... View more

Hi, We are a mobile app development team. We have MSE 8.0 with basic license. So we are trying to develop an app with Location Aware features (MSE REST API). Our concern / research is about the communication between mobiles app and REST API of MSE. The mobile apps must interact directly with REST API?                               Or We must create an external server, connected with REST API and external server interact with mobile apps? Please, attach the appropriate document for any solution. Thanks & Regards, Sotirios ... View more

Hi, We are a mobile app development team. We are trying to develop an app with Cisco MSE infrastructure.  We face a problem with the interaction between mobile app and the REST API of MSE. The mobile app must connect with REST API directly? Is there any document that describes analytically the way that we must built the connection between mobile Apps and REST API of MSE? The mobile app must interact with REST API Directly or via external server? Please, attach the appropriate document for any solution. Thanks & Regards, Sotirios ... View more

Hi, My name is Metaxas Sotirios and I am the administrator of Nable AMEA account. I tried to Disassociate Member from company and i got the following error. "Access Denied Your account does not have the appropriate access to display the requested page. Please contact your Cisco account representative for further direction." I can't Disassociate members from the company's profile, could you help me please. Best Regards, Metaxas Sotirios ... View more

Hello, I am Metaxas Sotirios, Team Leader of a software development team that specializes in mobile's applications development This period we are developing an application for mobile devices which will offer indoor navigation to the users, using technology from Cisco.  To complete our project we are using the technology given us by Cisco for detecting mobile devices within buildings via WiFi, the CMX – MSE in collaboration with CMX Mobile SDK of Cisco.  Our application created using CMX Mobile SDK and we tested in CMX Mobile App Server Simulator (Version 1.0.14) that is installed on a Windows PC (in our private network).  All worked properly with the Simulator. We didn't have any problems with the registration of mobile devices and we received location data (from Simulator) that appeared on the map of mobile device. We want to test our application in real environment conditions using the CMX prime infrastructure and the MSE.  We need to receive dynamic data location of the mobile devices and manage the paths from the Connect & Engage UI / Mobile App.  We would like to inform us where we can create this environment (DevNet, dCloud, somewhere else?) and also with which versions of CMX / MSE.  In order to test our application we have 4 APs (AIR-CAP3502I) and one Router (1800 series) which we should connect them with the WLC controller and CMX / MSE. Also we have installed the CMX Mobile App Server (Version 1.1.0.17) in Fedora Server 22 PC which is connected to Router’s Ethernet port, so that communicate with MSE and send location data to the mobile devices. We will configure the connection from MSE UI Configuration. The dimensions of our office are 21m x 6m and APs are installed according the arrangement which is referred by documentation of Cisco.    We are trying to create a Sandbox (Mobility Services Engine 10.1) but the lab didn't give us any tool. We can't found anything which will help us to  setup an environment in Sandbox. We need special permission to design anything in lab Sandbox? Best Regards, Metaxas Sotirios ... View more

Hello . I am Metaxas Sotirios, Team Leader of a software development team that specializes in mobile's applications development This period we are developing an application for mobile devices which will offer indoor navigation to the users, using technology from Cisco.  To complete our project we are using the technology given us by Cisco for detecting mobile devices within buildings via WiFi, the CMX – MSE in collaboration with CMX Mobile SDK of Cisco.  Our application created using CMX Mobile SDK and we tested in CMX Mobile App Server Simulator (Version 1.0.14) that is installed on a Windows PC (in our private network).  All worked properly with the Simulator. We didn't have any problems with the registration of mobile devices and we received location data (from Simulator) that appeared on the map of mobile device. We want to test our application in real environment conditions using the CMX prime infrastructure and the MSE.  We need to receive dynamic data location of the mobile devices and manage the paths from the Connect & Engage UI / Mobile App.  We would like to inform us where we can create this environment (DevNet, dCloud, somewhere else?) and also with which versions of CMX / MSE.  In order to test our application we have 4 APs (AIR-CAP3502I) and one Router (1800 series) which we should connect them with the WLC controller and CMX / MSE. Also we have installed the CMX Mobile App Server (Version 1.1.0.17) in Fedora Server 22 PC which is connected to Router’s Ethernet port, so that communicate with MSE and send location data to the mobile devices. We will configure the connection from MSE UI Configuration. The dimensions of our office are 21m x 6m and APs are installed according the arrangement which is referred by documentation of Cisco.    We are trying to create a Sandbox (Mobility Services Engine 10.1) but the lab didn't give us any tool. We can't found anything which will help us to  setup an environment in Sandbox. We need special permission to design anything in lab Sandbox? Best Regards, Metaxas Sotirios ... View more