Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,It's the first time i'm connecting my router to a Rogers Internet High speed (DOCSIS technologie) and i'm not getting any Internet..Here is my config:!interface FastEthernet0 description Rogers ip address dhcp ip nat outside ip virtual-reassembly ...
Hi,how come i m not able to apply a service-policy input when i m using LLQ or WFQ, i get the message :Flow Fair Queueing feature not supported in input policyall i want to do is to limit http to 512 kb download and upload Thanks guys
Hi everyone,is this config ok if i want to limit the bandwidth for any smtp traffic anytime to 256K ?class-map match-any smtp match protocol smtp match access-group 199!policy-map limit class smtp priority 256 class class-default fair-queue!int...
Hi guys,i have a cisco 1811 router (spoke) with 2 DSL connecions from my provider he is using DMVPN to connect to a 2811 (Hub). My question is how could i share (load balacing) my traffic using both DSL connections ?
i did remove it but no change..i'm getting an ip address from Rogers but i can t go to Internet with that. do you have any exemple for configuring a cisco 1811 with Rogers wich is working please ?
that is my way to say that i m nating my permitted traffic on access-list 1 with the ISP in FastEthernet0.all i want is an exemple to how to set a Rogers Internet high speed in Ontario.someone says to me that i should replace my default route :ip rou...
i tried everything u said guys but it seems like i can not really control the inboud of the bandwidth even with decreasing the defined bandwidth.Thank you again
thanks for ur time John but it didn t work, still my downloads starvs all my bandwidth and i cannot use LLQ with input policies.. i tried removing class voix from my policy-map to put service-policy input inbound and it didn t work neither.
when i removed fair-queue of class-default it let s me put my service-policy input but it does not limit my downloads to the specified rate in policing.and yes i m using nat interface FastEthernet0 ip address x.x.x.x x.x.x.x ip nbar protocol-discover...
