Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,I have question about routing.I have a 6500 running 12.2(18)SXF15 with a vrf pointing towards my monitoring server. How can I get the SMNP traps routed from the global table to the vrf?Well routing should of course work both ways./Ola
Hi,We are running an IDSM-2 with 7.0(1)E3 and 2 virtual sensors.I want to filter alarms from sig 2004 for a monitoring server.When adding an event action filter, it still sends alarms. Bug?? Is there another way to filter the alarms for a specific ho...
Hi,Is there any way to see what is causing the load on the cpu?We are running a 6504 with sup720 and 12.2(18) sxf16.The show proc cpu gives me an average of 60 - 80%, but the details only reveals 5-10. How can I see what traffic is actually causing t...
We are running a IDSM-2 module in a 6509 with vlan inline interface pairs.Everything looks fine until we try to join a server to the 2003 domain.I can't see the IPS dropping anything, but we get "network path not found" after entering the credentials...
Hi again Giuseppe,Do you know of any way to solve it with internal routing instead of a physical cable. The reason I ask is because because there is a bit to travel to get to the 6500.Regards/Ola
I removed produce alert on the signature.Enabled it again and then reapplied the filter, and for some reason, it now works. Anyway, thanks for your help.
