Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Please could you help.I need to mix up traffic shaping for both tcp protocols and ip protocols.My scenario is:I have got a router that does traffic shaping using CBWFQ. find my configs attached.shaping is ok.All the 3 clients are dsl clients and they...
Please could you help.I need to mix up traffic shaping for both tcp protocols and ip protocols.My scenario is:I have got a router that does traffic shaping using CBWFQ. find my configs attached.shaping is ok.All the 3 clients are dsl clients and they...
Hi guysiam trying to do traffic shaping on one of my cisco routers.I have 10 clients connecting to the router via adsl connections and the router is terminating pppoe sessions from clients, forwarding radius requests to the radius server.i have got a...
Hi guys. iam new to the aeronet 1131ag AP. it had an association with a controller wich is not there at all.My problem is, how do i reset the configs to default.the other thing is that i cannot configure it, its indicating an error messege ERROR!!!...
i made a mistake, maybe.Iam implementing shaping and if you check my configs i posted, they indicate traffic shaping.the actual setup is like:PC1<|PC2<|>RT1<>RT2<>internetPC3<|RT1 is doing traffic shaping, outbound on the interface facing the PC's.al...
are you saying we cannot manage bandwidth for downstream traffic?from they way i configured, it shows that traffic shaping is functional after typing this command: sh policy-map int f0/1.The only thing i want to do is to reserve bandwidth for ftp and...
