About zyckmeriandevil

zyckmeriandevil · 11-17-2023

Hello Peeps,Can you please help me if I missed anything?We've tried configuring SNMP on our device but the monitoring tool was not able to do SNMP walk on it.Configuration:snmp-server group testmonitoring v3 priv access SNMP-ACLsnmp-server user testm...

zyckmeriandevil · 05-29-2023

So I am just new with the Meraki Dashboard and we're planning to incorporate our switches with DAI. However, upon testing this, the servers became unreachable/the servers cannot reach the network.We've tried whitelisting the mac where it has been blo...

zyckmeriandevil · 11-20-2023

We have other 9300 switch with the same IOS image - the others , the monitoring tool were able to snmp walk, just this one switch. No access-list and we've tried reconfiguring and removing ACLs.9300-switch#debug snmp packetsSNMP packet debugging is o...

zyckmeriandevil · 11-20-2023

Yes, we have other 9300 switches who are polling fine with the monitoring tool. but this one switch is not working with SNMPv2 and v3 . And snmp traffic is not blocked.

zyckmeriandevil · 11-20-2023

No error, it's just that the monitoring tool is not able to do snmpwalk on device.SNMPv3 is already enabled and no error found.

zyckmeriandevil · 05-29-2023

Hello @alessandrodematos thank you for answering this.However, we've enable trusted DAI on ports connecting from switch to uplink, switch to MXFW, switch to MR Access Points.And these servers cannot connect to the network. We've even whitelisted the...

Member Since	‎11-17-2023 01:51 PM
Date Last Visited	‎11-27-2023 03:54 PM
Posts	6
Total Helpful Votes Received	1

User Statistics

User Activity

SNMPv2/SNMPv3 is not working on my device

Question Regarding Meraki DAI

Re: SNMPv2/SNMPv3 is not working on my device

Re: SNMPv2/SNMPv3 is not working on my device

Re: SNMPv2/SNMPv3 is not working on my device

Re: Question Regarding Meraki DAI