Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,I'm currently testing ACE acceleration module and be confronted to a limited number of concurrent connection by user. When a test is initiated with virtual users from a single computer (and thus a single IP source), the connections are rejected...
Hello,I'm currently looking a way to enable to switch to send the port VLAN in a RADIUS request. When a dot1x authentication occurs, the switch sends loads of information to the ACS but not the VLAN.I found the RADIUS attribute 87 (NAS-Port-Id) which...
Hello,I was wondering how does a switch proceed to detect when one or several radius server is down.If I leave only one radius server in a C3560-24PS (running with the lastest software version) and shut all services associated with my ACS4.2 through ...
Hello,I wonder how CSS calculate the server load. There is a way to limit the throughput of a server but it has to be expressed by a number between 0 and 254. Not so clear what to choose!Thank you for your explanations.David
Hello,I wonder if it's possible to do redirects by url rewriting. In fact, I want to redirect all HTTP requests to a single designated page. I dont want HTTP-302. I want CSS to do the rewrite job. Is this possible ?I was pretty sure it was but cant f...
Christopher, Kimihito,Thanks for you quick replies. And they mean by concurrent, 50 simultaneous connections on the whole LB, on a virtual server or coming from one IP client?David
Mmmh, I think I'll have to stick to Cisco's recommandation through Dynamic VLANS. I cannot rely on unsupported commands.I'll find a way to deal with dynamic vlans.Thank you for your time,David
The purpose is reach the same goal as dynamic vlan but with statics.For example, a port is configured in vlan 10. A device connects on the port and initiate a eapol negociation.A radius packet which include VLAN number is sent to the radius. Thanks t...
If the link you're speakin of is "Dynamic VLAN Assignment with RADIUS", it's not what I'm looking for.I know how to assign a dynamic vlan on a port, my problem is far the opposite: using the static VLAN configured on a port in the authentication deci...
