EERO suggested I upgrade to v7.1.1-16 when it came out.Still having same issue. (I.e. wired works fine. Wifi, at any speed, does not.)

Don't bother reading up on the Cisco AnyConnect bug unless you are using an iOS phone and SSID has an apostrophe..."When SSID has an apostrophe and Smart Punctuation is enabled on iOS phone..."

Steps/Workaround sent by EERO:Steps / workaround:Make sure WPA3 is disabledIf able, confirm if the device can connect via ethernetHide 5 GHz to confirm if the device can connect on 2.4 GHzIf hiding 5 GHz does not allow the device to connect, or if th...

Ditto.