About sedovsergei100

sedovsergei100 · 03-26-2024

I have a Cisco ISE and WLC. A redirection profile to the portal is configured on Cisco ISE.Access Type = ACCESS_ACCEPTcisco-av-pair = url-redirect-acl=GUEST_ACLcisco-av-pair = url-redirect=http://portal.website.comEverything works well.But when I giv...

sedovsergei100 · 03-27-2024

On the WLC you can assign the SG value to the SSID. But how can you force devices to open a website page when connected?

sedovsergei100 · 03-27-2024

If I redirect a user to a site using a WLC, I will not be able to assign a security group (TrustSec) to him.I can only do this on ISEAccess Type = ACCESS_ACCEPTcisco-av-pair = cts:security-group-tag=0003-7cisco-av-pair = cts:sgt-name=SG3cisco-av-pai...

sedovsergei100 · 03-27-2024

"internal network site" - is not a Cisco ISE portal. This is a website and information for guests.In document https://community.cisco.com/t5/security-knowledge-base/ise-guest-access-prescriptive-deployment-guide/ta-p/3640475 in section "Configure an ...

sedovsergei100 · 03-27-2024

The general idea is this. The user connects to WiFi. ISE assigns it security group 1 and redirects it to the internal network site. Now the user can perform actions in accordance with the policy for SG1 on FirePower. To do this, I need to allow full ...

sedovsergei100 · 03-27-2024

WLC - Cisco 5520 Wirless ControllerI need the devices to have full access to the external network at the time of transition to the portal.IdeallyACL - permin any anyBut with such a ACL the transition to the portal is not carried out.It was experiment...

Member Since	‎12-25-2023 07:24 PM
Date Last Visited	‎04-24-2024 12:05 AM
Posts	7

User Statistics

User Activity

Cisco ISE problem redirecting to the portal

Re: Cisco ISE problem redirecting to the portal

Re: Cisco ISE problem redirecting to the portal

Re: Cisco ISE problem redirecting to the portal

Re: Cisco ISE problem redirecting to the portal

Re: Cisco ISE problem redirecting to the portal