About MadhuK7555

MadhuK7555 · 07-30-2009

Hi,I am trying to setup a multicast video server over two PCs. The setup is very simple. I have at one end a WindowsXP PC connected directly to FastEthernet0/0 port of the 2600 router. I installed VLC media player and trying to stream a video to a mu...

MadhuK7555 · 07-31-2009

Hi!You nailed it! The problem was with the VLC media player. Even after setting the TTL > 1 it was sending packets at TTL 1. So I went back to previous version of VLC which let me send out with TTL > 1. Immediately without any further config changes ...

MadhuK7555 · 07-31-2009

Hi Peter,Thanks for taking a look into this. Like you mentioned I set the TTL to 3 in the VLC streaming options but for some reason the wireshark shows that the outgoing IP packets still have a TTL of 1. This could be a problem on the VLC software. S...

MadhuK7555 · 07-31-2009

Hi Jerry,Thats exactly what is intriguing to me as well. The incoming interface is always null. Should I set anything on the router FE interface that will let it identify the incoming interface ?What should I check in the server configuration ?Jerry ...

MadhuK7555 · 07-30-2009

Jerry, I tried as you said. Still no luck. Here is the mroute.--------------------------------------------------------------Router#show ip mrouteIP Multicast Routing TableFlags: D - Dense, S - Sparse, B - Bidir Group, s - SSM Group, C - Connected, ...

MadhuK7555 · 07-30-2009

Hi Jerry,Thanks for replying. I tried what you said and still no multicast activity. "show ip igmp groups" show the multicast address joined by the client. But client is not receiving anything except querries from the router. Also "show ip mroute cou...

Member Since	‎07-30-2009 02:58 PM
Date Last Visited	‎08-18-2017 03:54 AM
Posts	7

User Statistics

User Activity

Configuring IGMP / Multicast on Cisco 2600

Re: Configuring IGMP / Multicast on Cisco 2600

Re: Configuring IGMP / Multicast on Cisco 2600

Re: Configuring IGMP / Multicast on Cisco 2600

Re: Configuring IGMP / Multicast on Cisco 2600

Re: Configuring IGMP / Multicast on Cisco 2600