Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
So we have two sites, one with ACI and one without. In the site where there is no ACI, for a project PoC, we needed to deploy a new VLAN on the core switches and extending it to other access switches but no SVI for the VLAN. Basically, L2 VLAN only. ...
Hello All,Forgive me for any silly question as I'm still learning ACI.So, I recently join a small company where we have an ACI fabric. In most setups, I've always seen EPG being linked to interfaces using static ports. However, at this company they'r...
Hi @RedNectar I've a follow up question on this. How would the config change if I wanted to move the gateway out of ACI fabric to a firewall which is connected via an L3out (via SVI's in logical node profile) and using OSPF. How would I move the gate...
Maybe my question was not clear, sorry about that. I've attached below diagram for more clarity. Assuming the setup is as below, VLAN100 related stuff is purely L2 with gateway on the firewall, how would I advertise VLAN100 network to the l3out towar...
That makes sense. However, and this is just for my knowledge, what would be ideal solution if let's say that behind the ACI fabric, we've a bunch of L3out configured and I would also like to advertise this network (VLAN100) to the L3outs while the ga...
@RedNectar I've a follow up question - How would this setup change if we were to advertise that particular network within the fabric linked with VLAN 100 but the gateway still exists external to the fabric?For example, in the traditional setup, I wil...
