Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all,I was wondering does CISCO sell any standalone access-points that supports 802.1x assigned VLAN(s)? Basically I want to create one SSID (ie: GCORP) and have all users connect to that SSID for wireless connectivity. So if Joe connects to GCORP ...
Hi all,I have a question in regards to the 802.1Q intervlan feature on the WRVS4400N. My goal is to setup a test network with atleast 10 departmental VLAN(s). By reading the WRVS4400N's data sheet I know that it supports up to 4 VLAN(s). I decided to...
Hi I attached my config below I am using firmware c1200-k9w7-mx.123-8.JEB.I haven't got the time to clean up the configuration but this is how it works. When from different VLAN(s) log into the SSID: Wireless they get tagged with their appropriate VL...
Hi Betacomsvc,I got the Radius Assigned VLAN(s) to work without any problems using a standalone access point. Unfortunatley I lost the configuration but you need to upgrade the firmware (I would Google it) and then just follow the procedures.I got it...
Thanks Miadler,So to configure dynamic VLAN(s) I need a Cisco WLAN controller I can't buy a standalone aironet 1231G and configure dynamic VLAN(s)? The thing is my office only needs one access point I am cool with spending 400 dollars for an aironet ...
Thanks for the reply Miadler,I just want to verify that one more time. I am using Microsoft IAS as my Radius server. I got 802.1x dynamic VLAN(s) to work with my Catalyst 2950 it works like a charm! now I am planning on purchasing a Aironet 1231G cre...
