About remmus

remmus · 11-17-2003

Hi All, I'm new to BGP and I have a question regarding a config. in my internet router. we're running BGP via 2 ISPs but our hardware is just 2600 with 64MB memory.An access filter was implemented for this via the config below. ip as-path access-list...

remmus · 10-13-2003

Hi All, I am trying to run HSRP in our LAN (switched Network),basically what I want to do is run HSRP.1) My core would be composed of 3550 and 3508 switches and enable load sharing between the two. * HSRP Group 1 active for the other segment* HSRP Gr...

remmus · 07-23-2003

HI All, I'm running a switched environment and have a kiwi syslog server. My logs shows ports going up and down eventhough the workstation connected is not being rebooted. I was wondering what could be triggering this. I've pasted a copy of the log...

remmus · 05-22-2003

Have any of you guys encountered this error before. I have a Checkpoint Firewall1 with some clients configured for NAT, now this is causing some network loop. Thanks Guys! Any help is much appreciated.

remmus · 05-02-2003

I'm having a problem with my current network. currently we are experiencing a network loop. here is a part of the log.0000.e24c.f463 has moved from port 22 to port 20 in vlan1%RTD-1-ADDR_FLAP: FastEthernet0/19 relearning 5 addrs per minPort 19 is con...

remmus · 05-22-2003

Hi prem, here is the message I'd been getting from the logs.127: May 23 00:38:21.354 UTC: %RTD-1-ADDR_FLAP: FastEthernet0/1 relearning 8 addrs per min %RTD-1-ADDR_FLAP: FastEthernet0/15 relearning 9 addrs per minThis has been resolved a few days ago....

remmus · 05-14-2003

Hi all,I have setup a sniffer and found what the hopping address is. The Mac address belongs to our DHCP ServerMay 1 03:52:33.454 UTC: Add address 0000.e24c.f463, on port 22 vlan 1 May 1 03:52:33.459 UTC: 0000.e24c.f463 has moved from port 20 to port...

remmus · 05-12-2003

no VLANs whatsoever. All switches are running w/ their standard configurations. Do you guys think that the TACACS configuration could be causing overhead on the switches? Does VTP mode become a factor here, like all switches are running in VTP Server...

remmus · 05-02-2003

Sad to say I don't have any wireless device here in my turf. just plain cisco switches and workstations. Thanks for the help. I'm trying to narrow down the error to some switches only.

Member Since	‎05-02-2003 12:42 AM
Date Last Visited	‎08-18-2017 03:50 AM
Posts	14

User Statistics

User Activity

BGP Filter Question

HSRP Load Sharing on a switched Network

Ports Going up and Down

Cisco Firewall1 NAT causing Flap/Loop in my switched Network

Network Loop

Re: Cisco Firewall1 NAT causing Flap/Loop in my switched Network

Re: Network Loop

Re: Network Loop

Re: Network Loop