About everetts33

everetts33 · 03-30-2008

I seem not to be able to convert a 1252 from LAP to Autonomous. Anyone know if any issues with performing this task on the 1252?We are using the following document.http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/...

everetts33 · 03-31-2008

Thanks for the help.

everetts33 · 03-31-2008

Thanks for the recommendation. We will take another shot at it. I know it should not be difficult.Everett

everetts33 · 03-31-2008

fella5,This is pretty much my approach as well. We will try RRM but if we see issues we will turn it off and manually set the system up. We will then monitor to make sure everything stabilizes.Thanks for the information. Another opinion is always ...

everetts33 · 03-30-2008

fella5,What criteria do you use to determine if you hard set the channels and power or let RRM do its thing? My company installs into warehouse environments and RRM, prior to 4.1.185, did not appear to be a good thing. After 4.1.185 RRM got better....

everetts33 · 03-30-2008

Tom,Here is the link to another document that you may find useful.http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008064a294.shtmlGood Luck,Everett

Member Since	‎04-26-2007 08:00 AM
Date Last Visited	‎08-18-2017 03:54 AM
Posts	11
Total Helpful Votes Received	5

User Statistics

User Activity

Converting a 1252 from LAP to Autonomous Issue

Re: Converting a 1252 from LAP to Autonomous Issue

Re: Converting a 1252 from LAP to Autonomous Issue

Re: LWAPP Auto Channel Selection

Re: LWAPP Auto Channel Selection

Re: Controller failover