Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Dear AllPlease assist on below requirements for Cisco Secure Access Control System 5.8 (CSACS-5.8-VM-K9).VM specification required to support 5000 deviceTotal number of devices that can be supported on the local database of the ACE VMRegardsHarish Ba...
Dear All
One doubt related to Cisco ASA 5585 FirePOWER, the firewall comes with ASA on Slot 0 and Sourcefire on Slot 1.
1)
The port channel configuration was done between ASA (Ten 0/9 & Ten 1/9) and Nexus 7K (Eth 4/47 & Eth 4/48) but the ports were ...
I have a Cisco ASA 5510 with the following interfaces1) Ethernet 0 - 192.167.50.1/29 (Outside)2) Ethernet 1 - 192.168.50.1/24 (Inside)3) Ethernet 2 - 192.169.50.1/24 (DMZ)I need assistance for configuring the ASA for my exchange edge server at the DM...
Thank You Marvin
We managed to have port-channel with the interfaces from both slots but due to customer requirement we did not choose this option.
Regards
Harish Babu
Hi CelioThank you for your suggestions.It would be of very help if you please provide the NAT configuration for both Inside to DMZ and DMZ to Inside.RegardsHarish Babu
