Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,I have problems with multicast. On the same VLAN i can see the SAP announcement in VLC and play, but on different VLAN i can see SAP but i cant play it. The play turn to pause and the video doesn´t appear.I have 2 Cisco 6500 switch CORE with GLBP ...
Hi johnd...Im using VLC 1.1.2 (i can not update because i have a DVDT2 card to capture the digital terrestrial television and it only work in this version). I have all the firewalls down.This is the output for the show ip igmp snooping groups on the ...
Hi Jon, now i revert back to dense mode all interfaces.This is the output for the show ip mroute associate with the multicast stream.(*, 230.0.0.50), 00:16:21/00:02:43, RP 0.0.0.0, flags: DC Incoming interface: Null, RPF nbr 0.0.0.0 Outgoing interf...
Hi Johnd thanks for your answer, i made that you said but it does not works. I configure the loopback 1 with the ip address 192.168.230.230 255.255.255.0 and the ip pim sparse-mode. Then i remove all the ACls on the vlan interfaces and the ip pim rp-...
My enviroment is productive but i recently made the change to dense mode in both interfaces (51 and 80) but it doesnt works. The PC doesn´t play de video.Is there anything else to do?Thanks a lot.
