About fixitdaz

fixitdaz · 03-29-2024

Hi I have cisco slm248G with flashing system led, I have I serial cable arriving tomorrow so I can attempt to re install the ios. My question is, is ther a persific port I should connect to on the switch with the consol cable or any port from 1 to 4...

fixitdaz · 03-31-2024

Hi thanks for that suggestion unfortunately no look it juts will not factory reset thanks again for all your suggestions.

fixitdaz · 03-31-2024

I have tried to rest to factory by holding the reset for more than 10 seconds but ther is no indication that it has done anything should lights go off or something to indicate that the factory reset has happened I suspect it is not reseting to factor...

fixitdaz · 03-30-2024

it's not new I have tried resetting it. if I press and hold for 10 seconds or longer there is no indication that it has reset but if I press and release all the lights, light then goes off I would think there should be some indication that factory re...

fixitdaz · 03-30-2024

i have tried to ping ip no response.

fixitdaz · 03-30-2024

OK I tryed setting a static ip to laptop.ip address 192.168.1.10subnet mask 255.255.255.0default gateway 192.168.1.254dns 192.168.1.254 but still cannot connect to the switch using Web browser and address 192.168.1.254 any help would be welcome

Member Since	‎03-29-2024 06:47 AM
Date Last Visited	‎04-12-2024 01:02 AM
Posts	8

User Statistics

User Activity

Cisco slm248G with flashing system led

Re: Cisco slm248G with flashing system led

Re: Cisco slm248G with flashing system led

Re: Cisco slm248G with flashing system led

Re: Cisco slm248G with flashing system led

Re: Cisco slm248G with flashing system led