About cdcremin

cdcremin · 04-12-2024

Hi all I'm setting up a CISCO LAB to keep me busy in my retirement. My Current network consists of a TP-Link Deco mesh network which works well for my IOT, PCs and internet access. I just got hold of a Cisco 1941 router with a EHWIC D8SGP module. ...

cdcremin · 04-16-2024

Yeah all good picked that up. It's g0/0.1

cdcremin · 04-16-2024

Hi Chris,Mate thanks for your support. I have implemented your suggested changes and not helping at this stage. As I said to RAdamsWilliams, I will have a go at moving the Deco further back in the network and connect the 1941 directly to the NBN i...

cdcremin · 04-16-2024

Het mate thanks for your support. I have implemented your suggested changes and not helping at this stage. I will have a go at removing the Deco further back in the network and connect the 1941 directly to the NBN interface. Unless your got anymor...

cdcremin · 04-16-2024

Hi Chris,Please find below current router startup-config, Info from PC 1 on vlan 10 for ping, ifconfig /all, arp -a results and router output. Router>sh ip route, show arp and show ip nat translations verbose. Thanks Colin

cdcremin · 04-16-2024

Hi Thanks I have added a return route on the TP-Link Deco LAN interface (10.0.0.0 255.255.0.0 192.168.68.99) and that allowed PCs on the VLANS (ie:10.0.10.0 network) to ping the Deco gateway (192.168.68.1) but still not able to reach the beyond that....

Member Since	‎04-11-2024 04:25 AM
Date Last Visited	‎10-08-2024 03:50 AM
Posts	8

User Statistics

User Activity

Need some assistance with some basic VLAN/Routing config Cisco 1941.

Re: Need some assistance with some basic VLAN/Routing config Cisco 194

Re: Need some assistance with some basic VLAN/Routing config Cisco 194

Re: Need some assistance with some basic VLAN/Routing config Cisco 194

Re: Need some assistance with some basic VLAN/Routing config Cisco 194

Re: Need some assistance with some basic VLAN/Routing config Cisco 194