Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
HiI have a series of 1200 series access points, set-up for WDS infrastructure mode to ACS and client authentication to Microsoft IAS. When set up in WDS mode, clients authenticate to the IAS server (and event viewer confirms this), but clients do not...
Hi,Has any body had a similar problem as me.When I configure the access points (cisco 1200 series IOS 12.3(4)) for tacacs+ access, the console and CLI work fine, the the Web HTTP access continually prompts for passward and I can never gain access via...
I have implemented WLAN in a four floor building as per the following e.g.:-vlan 2 - 1st/3rd floor subnet 2.x.x.2 /24 - SSID Corporatevlan 3 - 2nd/4th floor subnet 3.x.x.3 /24 - SSID Corporatevlan 4 - all floors guest access subnet 4.x.x.4 /24 - SSID...
All sorted now - I had a look on previous TAC cases for WLAN and it appears that the command (which was in by default in our config) of 'mobility network-id xx' needed to be removed. Upon removing, DHCP kicked into life.
(from Original Poster)All, I have sorted the problem. At present we don't currently look after the radius server (soon will be hopefully), but assumed that they had added the NAS devices. The new subnet that I wished to use as a management subnet was...
