Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,I am in the process of migration from CSM module to ACE and I do have a questionregarding "nat server" functionality. I.e. for CSM module there is certain serverfarmconfiguration:serverfarm MID nat server nat client MID predictor leastconns ...
Hello,I am trying to audit an existing configuration of CSM module. Unfortunately have not an experience in CSM module configaration.The main goal is to understand if there are any direct connection between servers in different serverfarms (i.e. serv...
Could someone confirm whatever a NAT is supported for ACE-20 module, please?Let me to explain technical details.I do need to convert working CSM(SLB) config to ACE configuration and I am not quite sureif the configuration below is correct. ACE module...
Hello,Could someone confirm that a command "module clear-config" applied on 6513 catalystfrom the global configuration mode before you physically remove the module doeswhat it should?According to the command description, while this command exists in ...
Hello,Could someone explain me what is correct steps to clearing catalyst 6513 configuration from CSM module sections, please?I am planning to migrate from CSM to ACE module in 6513 andinteresting if is it safe just to do the following:1) powerdown C...
Thank you, Christopher for response.I supposed that there is no easy way to remove CSM module configuration...BTW, have you ever used the "module clear-config" command.According to the command description, while this command exists in config, after r...
Thank you, Gilles for a response.Just to make sure that everything is clear for me, I do need1) disable RPF using "no ip verify reverse-path" 3) use "mac-sticky enable" for every client vlans interface2) set only one default gateway (0.0.0.0/0) to t...
