3002 running 4.7 in network extension mode, pix running 6.3(5). Require connections from the private subnets behind the pix to private subnetsbehind the 3002. It appears the 3002 only supports the directly connected subnet off it's private interfac...
cannot seem to get bidirectional nat working on a 2801 running 12.4.ip nat inside source static 10.1.1.1 66.170.199.205With this static nat entry you can get to the inside host at 66.170.199.205, but 10.1.1.1 send traffic source nat'd to 66.170.199.2...
Having problems with a l2l tunnel on a 515e running 7.1(2), can't find documentation on the following message, anyone seen this before?Jun 23 22:50:11 [IKEv1]: IKE Receiver isakmp disabled on <outside>
I do, see below. 10.1.2.10 is the culprit, inbound to works fine, outbound from 10.1.2.10 does not.ip nat inside source list 199 interface FastEthernet0/0 overloadaccess-list 199 deny ip host 10.1.2.10 anyaccess-list 199 permit ip any anyip nat i...