About karthikmani

karthikmani · 09-18-2006

Hi,We have an Adtran 3200 router connecting a Verizon T1. Every morning, the circuit goes down. Reboot doesnt work. When I call Verizon, they say that they will test the circuit. They call back and tell me that they tested clean till our smart jack. ...

karthikmani · 09-20-2006

We have a full T1 and not fractional. 1-24 timeslots. Verizon is providing clocking and they have clock source internal. So my router has clock source line. They have tested it over 6 times till our smart jack and they are clean. No errors what so ev...

karthikmani · 09-19-2006

The controlled slip seconds counter is incrementing every second. This is a T1 from Verizon to the internet. The other end is a Quest router that I have no control of. They calim to have checked and report that it is either my router or cables or som...

karthikmani · 09-19-2006

The controlled slip seconds counter is incrementing every second. This is a T1 from Verizon to the internet. The other end is a Quest router that I have no control of. They calim to have checked and report that it is either my router or cables or som...

karthikmani · 09-18-2006

Hi Phil,Here is Adtran's output.__________________________________________Router#sh interfaces t1 1/1t1 1/1 is UP Receiver has no alarms T1 coding is B8ZS, framing is ESF Clock source is line, FDL type is ANSI Line build-out is 0dB No remote loo...

karthikmani · 09-18-2006

Hi Jerry,How about using route maps? Match port 25 and change the next hop to your location. let me know if this helps.Thanks,Karthik Mani.

Member Since	‎05-25-2006 11:02 AM
Date Last Visited	‎08-18-2017 03:55 AM
Posts	6

User Statistics

User Activity

2600 WIC-1DSU-T1 Flaps

Re: 2600 WIC-1DSU-T1 Flaps

Re: 2600 WIC-1DSU-T1 Flaps

Re: 2600 WIC-1DSU-T1 Flaps

Re: 2600 WIC-1DSU-T1 Flaps

Re: port based routing