Hi there,i have configured within an ace context two vlans with a bridge group and one bvi interface.Here is the Config :access-list ALLOW_ALL_TRAFFIC line 7 extended permit icmp any any access-list ALLOW_ALL_TRAFFIC line 8 extended permit ip any any...
Hi there,i have configuerd my acs with an custom attribute : shell:Admin=Admin. AAA with the ACE works fine... But now i can't login into my switches :-( i got the massage authorization failed. Here is the aaa debug from the switch :Jul 12 13:41:38.4...
Hi there,i have configuerd my acs with an custom attribute : shell:Admin=Admin. AAA with the ACE works fine... But now i can't login into my switches :-( i got the massage authorization failed. Here is the aaa debug from the switch :Jul 12 13:41:38....
Hi there,i have a little problem with tacacs+ and the ace module.i have configured aaa authentication with tacacs. The authentication with the ACS works fine. But when i am logged in on the ACE module, i can't work with the command configure... when ...
Hi there,is there any working version of CVDM that works in in the folowing configuration ?IOS : IOS (tm) s72033_rp Software (s72033_rp-IPSERVICESK9_WAN-M), Version 12.2(18)SXF7, RELEASE SOFTWARE (fc1)CSM-S Software : 2.1.4Best regards Dirk
Hi ,i've got the following info from a user here in the forum :http://www.cisco.com/en/US/products/hw/modules/ps2706/products_configuration_guide_chapter09186a0080686bbb.html#wp1519045[quote]The user profile attribute serves an important configuratio...
Hi Prem,thanks a lot. it's working now... FYI i need this attribute for role mapping USER<>ROLE in the ACE. http://www.cisco.com/en/US/products/hw/modules/ps2706/products_configuration_guide_chapter09186a0080686bbb.html#wp1519045Can you give me a lin...
Hi Gilles,i found the reason for the problem . i forgot the line vty configuration :transport input ssh telnet..Now it works fine..But now i have the next question... it is possible to work only with ssh and the cdvm ? or do i need telnet everytime ?...
