Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Javier,Following link mentions the recovery procedurehttp://www.cisco.com/en/US/docs/app_ntwk_services/waas/waas/v431/configuration/guide/maint.html#wp1105354You can use the below steps to console to the nme-wae and then follow the steps mentioned in...
I would start by putting in a policy for that host ip and making that traffic pass-through,so that your optimized connection count does not get used by that host.Then you would need to check on that host ip and try to verify if its some kind of netwo...
Hi George,On the router you can create a different subnet for the wae device and configure an ip on that subnet for the wae 674 device.In this case you can use the default gateway on the 674 as the hsrp address and will use ip forwarding as the egres...
Hi George,Starting from WAAS version 4.1.x ,you first need to upgrade the CM and then the wae devices.So in your case you first need to upgrade the CM to 4.3.3 and then the HO 674 device.We also always recommend to have all the devices running the sa...
