Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We are in the process of moving from On-Prem ISE 2.7 to Azure 3.3 - fresh build.AP's are Cisco Meraki, none of the guest SSID setup has been changed bar the Radius server IP's.Guest portal is DNS resolvable from AP subnet & from ISE however when conn...
Hi,We have a two node deployment of ISE 3.3 in Azure. We have added a second NIC to the virtual machine to be our Guest interface.When loading our Guest SSID the splash page is no longer loading. Below is what I have done so far.Subnet of the interfa...
The portal does have an FQDN associated to it's IP address yes. The FQDN is resolved from an internal DNS server - the AP has no issues resolving this.The client can access the portal IP through the Meraki walled garden config.
I have a wildcard certificate issued by a public authority on my Guest splash.Manually I am also unable to access.Corporate SSID is using internal DNS servers.Guest SSID is using Google DNS.AP's have internal DNS since as per this doc it's the AP's w...
I don't think it's DNS. Everything I've tested proves that to be working. I've detailed here since a different issue - https://community.cisco.com/t5/network-access-control/ise-hotspot-page-not-loading-on-guest-ssid/m-p/5146254#M590691
@Flavio Miranda thanks. I looked further into your suggestion to solve my initial issue.My default gateway is the DG of subnet attached to gig0Added a default route pointing to DG of subnet attached to gig1 which works for splash page when loading on...
