Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All,I'm trying to configure a local user on a C9300-24P switch operating in 'INSTALL' mode & running IOS version 17.06.05.Below is an extract of 'show-run' for AAA:aaa authentication login default localaaa authentication login AUTHEN-EU-ISE-ADMIN ...
Hi Community,Recently I stumbled across a strange behavior on our Cisco 2960 switches. We've a local user which can login to the switch.However, when I check in the run-conf, the user doesn't appear to be configured in the local db.Login user:Switch1...
HI @Flavio Miranda Thanks for the feedback.I have disabled radius while testing but local account is still failing.I also tried configuring usingaaa authentication login default group radius local.But it still fails. Could you recommend any other pos...
Many thanks @MHM Cisco World .It was indeed an issue with the ISE server. ISE licenses expired over the weekend & hence the authentication from the switches started failing.809648: .Jul 18 2024 11:25:06.872 UTC: %SESSION_MGR-5-FAIL: Switch 1 R0/0: se...
@MHM Cisco World : Hi, I tried running the above mentioned command but it wasn't accepted by the switch.However, I tried using show authentication sessions interface Switch1#show authentication sessions interface Gi1/0/25Interface MAC Address Method ...
