Hi,Which Interface is your workstation connected to? Seriell 0/0 or seriell 0/1?Ask the admin which win-size is 7, layer 2 (HDLC) or layer 3 (x.25). You have to be sure that layer 3 win-size is 7. Please post a longer debug, but it seems one win size...

Hi,First of all modulo has nothing to do with window size. It seems your x.25 workstation has configured a higher layer 3 window size than your router. Cisco uses a default window size of 2. As you can see your x25 workstation sends more than two pac...

Hi Roland,For me it sounds like a clocking problem. If your provider doesn't deliver clocking, one of your routers has to be configured as clock source internal., but unfortunately not every E1-controller supports this setting.

Hi Vijay,I would recommend to configure ppp multilink with authentication chap. The ISDN leased line configuration always causes problems, because the two b-channels might not have delay. Andreas

Hi Andy,The first two discribe local interface ip octets in/out.The two others:ipInAddrErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of input datagrams discarded becau...