Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We have two networks HQ and Site1 and for some reason we can’t ping the inside IP for Site1 PIX device. We have site-site-VPN set up between the two and everything works fine except we can’t ping the Site1 PIX from internal IP. However, I can ASDM/SS...
Site A ASA5550 with vlan1, vlan2, and vlan3 <~~ HeadquarterSite B ASA5510 with vlan1Site C ASA5505 with vlan1Site A is a HQ and we have Site-to-Site VPN set for all sites with IPsec IKEv1 IPsecSite A <--> Site BSite A <--> Site CProblem is on Site A ...
Platform: Win 7x64 client with OCS 2007 R2, connecting to CUCM 7.1.3 with CUCIMOC 8.0.785 client.After installation it looks like I can log in cleanly with my windows credentials. However, I do get an error in the Server Status window, as attached. ...
Thanks Julio for your reply. We are currently running PIX Version 8.0 (3) and yes we do have management-access inside configured.Cisco PIX Security Appliance Software Version 8.0(3) Device Manager Version 6.0(3)Hardware: PIX-515E, 128 MB RAM, CPU P...
Jennifer, Thank you for your reply. Yes, I do have management-access inside configured on the PIX.console timeout 0management-access insidethreat-detection basic-threatthreat-detection statistics access-listAny other suggestions?
Julio,1. Site B Branch is receiving the traffic from Site A HQ2. Site B Branch decrypted the traffic and then sent to the Site B Branch inside interface to the host3. The host from Site B Branch replied the packet never reaches to Site A HQIn the oth...
