Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We have Cisco ME3400 switch, with configuration described below.GE0/1 port is uplink:interface GigabitEthernet0/1 description ***MATED-IUB_C&U-Plan*** port-type nni switchport trunk allowed vlan 331,450,4085 switchport mode trunkGEo/2 is configured a...
Pls find the response to the above command below:rjrncbb1#show ip arp summary 99 IP ARP entries, with 34 of them incompleterjrncbb1#show interfaces accounting | i Ethe|ARP|VlanVlan1 Vlan331 ARP 4 240 46 ...
The hosts are connected to various locations, but connected to switch trhough single GE interface 0/2.And some 4 to 5 hosts are connected to single FE port 0/15.Well as per last two days observation, the ARP input process going up on aroung 15:00 in...
I've changed 0.0.0.0 route to 10.0.0.0ip route 10.0.0.0 255.0.0.0 10.135.232.158ip route 10.72.224.96 255.255.255.240 10.72.228.193ip route 10.72.228.64 255.255.255.240 10.72.228.193But still the problem is the same..the cpu utilization increases abr...
