Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi Guys,I have this problem.My setup is like this:router eigrp 5network 0.0.0.0 255.255.255.255no auto-sumWhen i do:ip route 10.5.1.0 255.255.255.0 null0this route gets redistributed int eigrpbut when i doip route 123.5.6.0 255.255.255.0 null0this is...
The solution would be to use Zone Based Firewall this is the new ios firewall. The configuration is lenghty but if you have experience with PIX/ASAs you will find it easy to learn.http://www.cisco.com/en/US/products/ps6441/products_feature_guide09186...
lamav wrote:Interesting topic...Was just reading some QoS material...So, is SRR a queueing mechanism like WRR, WFQ, CQWFQ, etc?Yep Is it used in conjunction with others?Is it used with classicifaction and marking, as in an MQC architecture?It has it'...
Hello,As per my understanding limiting on egress on a 3560 using "srr-queue bandwidth limit 30" drops the excess and does not delay it as you asked in the first post.Regarding the test results are you sure they are accurate ? Have you tried testing ...
Hello,I belive this configuration is not correct. The formula used to assign a certain bandwidth to queues when shaping on egress on 3560 is portspeed x 1/weightSo in this config for example queue 1 would get 100Mbps x 1/10 = 10Mbps etcAlso a weight ...
