Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,Trying to upgrade PIX 6.3 to 7.04After reboot, and now cannot do a TFTP to copy the image into the Flash.I am unable to set the INSIDE interface to have an ip address. Did a sh run - its there in the config. Did a sh int ip brief - unassig...
Hi,Yes ...its on the same subnet - 192.168.100.3 /24Its where I am able to TFTP from rommon of the PIX.But once reboot into 7.04 image, i am unable to assign an ip address to the interface (any interface - i have 6 ethernets).How to get check ARP whe...
no failoverDid that... no changes...here's my outputPIX Version 7.0(4)!hostname PIX515Eenable password 8Ry2YjIyt7RRXU24 encryptednames!interface Ethernet0nameif outsidesecurity-level 100ip address 10.1.1.10 255.255.255.0!interface Ethernet1descriptio...
Hi,Thanks for the reply. Yes... status is up/up. I can see the lights on the E1.The connection should be ok since it can transfer file from the initial rommon mode.I am using a switch in between PC and the PIX.I have also another PIX515, and the co...
