Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We have an ASA5505 firewall, and 1 server on our internal network - this server runs DNS, mail, DHCP etc...We want mail and webmail from external IPs to forwarded to our internal server.We understand it is possible (but not easy) to do the port forwa...
I have a PIX 506E (PIXOS 6.2(2) ) with a single routeable static IP address (10.20.30.123 in config below) using PAT to translate internal traffic to the outside interface. From home I access the internal network via VPN (split-tunnel arrangement us...
I did some VPN speed tests and found big differences when using different transfer methods for upload/download (comparing ftp, smtp/pop and explorer drag/drop).I have a home cable modem (best speed around 400 kbit/sec).FTP transfer of 30 Mb file:---...
All internal computers (including the mail server) can browse the internet with the firewall inside port as their gateway - this indicates PAT is working fine from the inside going out. It is only the outside mail that is unable to be port forwarded ...
Thanks for the suggestion - I tried this and no change. I already had "any any" for port 25 access-rules...Outgoing mail works, but nothing can come in...Any other suggestions? Total brick wall here...
Mike - thank you for taking the time to reply - unfortunately I have tried what you have suggested, and smtp incoming still does not work.My full config is below (default with only a port forward of the mail server - nothing else). Internet access f...
Thanks... The port redirect worked (plus access commands)... I am still having problems with Mailguard (fixup protocol smtp etc) in 6.2(2) but will dig deeper before posting.For the record, the following commands (entered from CLI, not PDM) worked...
