Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Dear,MAB on C9300 doesn't start with some medical equipment.With my PC it works fine if i put my mac-address on the ISE.And Dot1x work fine also.D-9300#sh run int gi 1/0/2!interface GigabitEthernet1/0/2switchport access vlan 70switchport mode accesss...
Yes, you are right. In vlan 70 nothing happens because it is the default rubbish vlan. In vlan 505 the host responds to broadcast packet that he receives.For security reasons, we can't put the switch port in vlan 505 directly because it is a hospital...
The device doesn't do 802.1x, that the reason his mac address is in the ISE encoded.With the vlan configured on the port :D-9300# sh run int gi 1/0/2!interface GigabitEthernet1/0/2switchport access vlan 505switchport mode accessswitchport nonegotiate...
