About thomson77840

thomson77840 · 07-08-2010

I am having a hard time connecting via SSH to the switch.I have enabled SSH under TCP/IP services. I have also created a Management Access Profile enabling all protocols from all interfaces and all ip addresses.When I connect using putty, I just typ...

thomson77840 · 06-11-2010

It seems like you should be able to use GVRP in the following manner:1. Create vlans on a "master" switch and use them however you like.2. Need more switch space, so you add an additional switch3. Enable GVRP on both switches4. Connect a cable be...

thomson77840 · 06-10-2010

If you add a VLAN with the same ID as one that was dynamically added via GVRP, the switch will show that the vlan was added, but you are not able to delete the VLAN unless you manually reset the page.Here are the screenshots detailing the steps:1. Sc...

thomson77840 · 06-08-2010

Page 319 of the admin guide shows the path of the Network Configuration menu to be as follows:Switch Main Menu > System Configuration Menu > IP ConfigurationI think it should say :Switch Main Menu > System Configuration Menu > IP Configuration > Netw...

thomson77840 · 08-25-2010

Thanks for the detailed response!I still can't replicate your problem on my device, so I have a few more questions for you:1. What is your firmware version (just for a sanity check)? You can check this through the console: System Configuration Menu >...

thomson77840 · 08-23-2010

This is strange, you should be able to do what you are describing. I just applied this setting my self and had no trouble whatsoever accessing the web interface after the switch got it's DHCP IP address.Make sure that you have enabled the HTTP serve...

thomson77840 · 08-20-2010

Just coming from memory here,Did you check the log? I think that was the only place that I saw mention of why the port was down.I agree that it should be listed somewhere on those pages you were talking about.Certainly seems like a bug if it says UP...

thomson77840 · 08-18-2010

From my experience, it seems like although the VLAN is created dynamically on the second switch (in your case the SRW), you cannot use it until you statically add it.Although it seems like your steps should work, the problem lies with the original re...

thomson77840 · 07-28-2010

Thanks for pulling this over here. I can't really make a comment as to why Small Business wants to continue FE. Maybe it has something to do with not dropping switches from the lineup? I do agree that I'd like to see a lot less choices in this area...

Member Since	‎04-21-2010 12:52 PM
Date Last Visited	‎08-18-2017 03:55 AM
Posts	26

User Statistics

User Activity

SSH Connection Help

What is the purpose of GVRP?

Create VLAN page glitch (GVRP)

Network Configuration in Admin Guide (very minor issue)

Re: layer 3 mode

Re: layer 3 mode

Re: port security action shutdown

Re: What is the purpose of GVRP?

Re: FE vs GbE justifications...