Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a DGway of 31.210.99.10/27 and i want to translate the ip addr to 192.168.xx.xx ( internal ip SNMP) to 31.210.99.xx/27i did the commands static (inside,outside) 31.210.99.xx 192.168.xx.xx metmask 255.255.255.255access-list 101 permit tcp any...
I have 2 x ASA acting as default gateways the two can ping each other but when i tried to ping the far end devices like servers from one of the ASA it does not ping.dc3-fw1# ping 192.168.98.13Type escape sequence to abort.Sending 5, 100-byte ICMP Ech...
Hi,Still no joy cant ping the mail server at all..Phase: 3Type: ACCESS-LISTSubtype: logResult: ALLOWConfig:access-group 101 in interface outsideaccess-list 101 extended permit tcp any host 38.210.x.x eq smtpAdditional Information:Phase: 4Type: IP-OPT...
Hello, just wanted to confirm the internal mail server is 192.168.xx.xx and the ip addr we want to come through the Fwall is 38.210.xx.18.and the gateway of the firewall is 38.210.xx.20
Saurabh goelNo not working went to the web site https://www.wormly.com/test_smtp_server..Did some tests and nothing..its not working at all..Can you help or any body??..is there anymire access lus to be added,,thought i did this right.
hello to b on the safe side i deteledt the rule and added it again and i carry out the pacte tracer and the result:ASA-1# packet-tracer input outside tcp 4.2.2.2 1025 31.xx.xx.xx 25Phase: 1Type: FLOW-LOOKUPSubtype:Result: ALLOWConfig:Additional Info...
