About ivanindic

ivanindic · 11-29-2019

Hi all, We are currently trying to setup dhcp relay inside ACI and also the Option 82 on the MS AD SRV 2019. I went through the description in the Cisco technote, which is quite easy for the ACI configuration itself. What I haven't understood correct...

ivanindic · 09-02-2019

Hi all, Does somebody has experience deploying WAN MACsec encryption with an ASR 1001-X on a 10Gbps DCI links based on MetroEthernet service? Main questions are:Is it stable or how many link interruptions do you have per year?Does it perform? (10Gbps...

ivanindic · 07-24-2019

Dear all,I have created a standard ACI tenant with the corresponding VRFs, BD, ANPs, L3Outs etc.I would like to export only this tenant configuration as JSON (for automation purposes). Is this possible?I have exported the full config as JSON but it's...

ivanindic · 11-27-2020

Hi Cristian, I am looking forward for the option 3 which should now be supported from the ISE 3.0. Can you guide me to some configured guide from Cisco which I could follow to set it up? (ASA - ISE - SAML IdP with Azure AD and Azure MFA) I came acro...

ivanindic · 07-24-2020

Hi viksing3, We still use it. We have no faults in the console. Inside a tenant we configured the application epg based dhcp relay (Policies - Protocol - DHCP). Then we have assigned the dhcp-relay-lable to the corresponding bridge domain which has t...

ivanindic · 12-20-2019

Hi all, We finally discovered the proper solution for our use-case. Let me share it with you:If you segment your ACI tenants with a firewall inbetween and you need to enable dhcp relay in ACI, you need to configure a DHCP relay per tenant.Inside the ...

ivanindic · 12-11-2019

Well, this is exactly how we have configured it. I have attached two screenshots. The client subnet (100.76.2.0/23) routing table has no direct route to the destination subnet (100.78.0.0/23) so it has to use the default route (0.0.0.0) which points ...

ivanindic · 12-10-2019

Hi, let me try to simplify: - The VDI Client (source network 192.168.200.0/24) and the DHCP server (destination network 192.168.100.0/24) are in "different" VRFs.- The only way to reach the DHCP server from the client VRF is by routing through the L3...

Member Since	‎06-22-2013 01:21 AM
Date Last Visited	‎08-25-2021 12:34 AM
Posts	17
Total Helpful Votes Received	5

User Statistics

User Activity

ACI dhcp relay for MS Server 2019

Experience with WAN MACSec on ASR-1001x for DCI

Export ACI Config (JSON) for a specific tenant

Re: Best way to integrate ASA/ISE/Azure AD for MFA?

Re: ACI dhcp relay for MS Server 2019

Re: ACI dhcp relay for MS Server 2019

Re: ACI dhcp relay for MS Server 2019

Re: ACI dhcp relay for MS Server 2019