Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
hi all,
I have lab for interAS MPLS TE using BGP label. The topology is above, the goal is to create MPLS-TE from R1 to R6
I create to build MPLS TE from Head end (R1) to tail end (R6),but stay down.
The log error was no route to destination at IP p...
hi @Harold Ritter ,
thank you for your help,
but my last question, does BGP+Label can carry RSVP? because i'm not find yet untill now about the cisco documentation about that,because in my understanding is BGP+label only exhange the IP (L3) not vlan...
hi @Harold Ritter ,
thank you for your reponses.I'll try to raise to the TAC.
that's what customers need to run mpls-te, eventhough there's only single path on those domain and the l2vpn & l3vpn services already running well between R1 and R6.
thank...
hi @MHM Cisco World ,
already do what you suggest:
R1 to R2: MPLS-TE UP
R2 to ASBR3: MPLS-TE UP
ASBR3 to ASBR4: MPLS-TE UP
ASBR4 to R5: MPLS-TE UP
R5 to R6: MPLS-TE UP
Do that' save config close lab (to force mpls label to re-exchange) : doneR1 to R...
