Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi Kim,Please check following on PIX firewall.1. Show interface (make sure that it is not negotiating at half duplex, no crc error, no overrun and any other type of error on ingress and egress interface).2. Show memory3. Show cpu usageNote: above sho...
Hi Zoran,I was checking some configuration example and here are some Prerequisities for asr-group:You must have to following configured for asymmetric routing support to function properly:•Active/Active Failover•Stateful Failover—Passes state informa...
Hi Zoran,If tcp state bypass is not an option. then we can troubleshoot asr-group configuration.can you please check if you have correctly identified ingress and egress interface and applied asr-group to correct interface.--Anubhav Swami
Hi,Please interrupt boot process using esc or break and see if your device enters monitor mode. Now check if "fsck disk0:" is available in monitor mode. If yes then run it and check file system on flash.Boot firewall again to see if this fix this iss...
