Hi,You may want to look at a management device such as the Allot Net-enforcer.This will allow both IP based bandwidth management and monthly accounting for all your clients as well many other features.Our Cisco wireless network covers over 20 communi...

I agree, however amplification is used in order to correct for cable loss on tower infrastructure, further, it has not been an issue for 4800, 340 series equipment as well as other vendor equipment. We do believe that we have found the problem. Durin...

We have downgrade the AP's firmware to 11.23T. on two 350's that have this problem. This seems to have corrected the problem on one AP but has not on the second. Here is the problem:The access point does not reply an icmp request from our monitoring ...

We have managed to stabilize the bridge links, by setting the role to non root bridge w/clients as suggested. However, we are seeing the same problem with the Access Points and have not been able to find a settings solution.Is it possible that the in...

We also are experiencing this problem, after upgrading approx 100 units to now ver 12.02. We cannot seem to resolve this issue and have tried changing every setting which might affect this problem. We have noted that this problem is isolated to the 3...