Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi guys,We have an ASA 5510 firewall and in our DMZ we have a server listening on port 443. For this server, we already have a public IP address on the ISP' router. All the traffic to this IP address on port 443 is natted to the ASA's outside interfa...
There's no reference to inside zones. What I meant is that each service has a dedicated outside subinterface for the incoming traffic and the outgoing traffic refers to the subinterface as the egress interface and the ISP's router subinterface as the...
Hi Peter,Thank you for your post. In fact, it was the solution. The outgoing traffic is routed according to the routing table. The ISP router is the default gateway for all the outgoing routes. So, if the traffic is for Host_SFTP or Host_Spamfilter, ...
Hi guys,It works now. It was a routing problem. We needed to add another static route on the interface Outside_3 to allow outgoing traffic to be routed on the appropriate interface. Thank you so much for your help, you are my heros
