Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hey Guys,Have a wlc 2106-k9 controller and 6 APs air-cap1702i-e-k9, they can work together? The AP's appear in the Statistics but with status "not joined".The wlc software is 7.0.98.0The aircap1702i software is LWAPP image version 8.2.100.0im connect...
So,My WLC is from September 2008 and certificate expired in 2018 but if i use the date maybe 2017 on both WLC and AP they should join, right?Cause the other guy said my AP Manufactured in 2016...But still not joining the WLC, firmware discrepancy?
Is this the right certificate of WLC? Cisco Controller) show>local-auth certificatesCertificates available for Local EAP authentication:Certificate issuer .............................. vendorCA certificate:Not installed.Device certificate:Not instal...
I have put real time on both and not working, i changed a few years back to see if helps...noI've noticed that the AP isnt saving the clock, everytime it restarts i have to set the clock, its weirdThat command "config ap primary-base <CONTROLLER NAME...
Here is the Log to see if helpsAP-CISCO-02#clear capwap privateAP-CISCO-02#clear capwap private-configAP-CISCO-02#reloadProceed with reload? [confirm]Writing out the event log to flash:/event.log ...*Mar 1 00:03:34.467: %SYS-5-RELOAD: Reload requeste...
