Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
You can mask the "calling number" for internal calls by using calling search spaces, partitions and translation patterns. I have done this with CM 3.1(x) but have not checked to see if there is an easier way to do this with 3.2. Email me if you wo...
Make sure you can ping the Call Manager by name from the client you are running Personal Address Book Synchronizer on. Even if you specify the Call Manager by IP address in the configuration the client PC must be able to resolve it by name.
I have set this up with an FXS port as an MGCP gateway and added DN "1234" to it. I set up a call pickup group and added that number to the configuration of the DN on the gateway. Now you can either assign the same pick up group to all your phones a...
You can use an analog DID card to FXO port on a Cisco gateway. Assign a pool of DIDs from the PRI and point them to the FXO port. DID information will be sent to the analog DID board via DTMF. You will need another card for outgoing FAXs. Brooktro...
