Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I'll try to keep this simple. I've spent about 18 hours researching, searching and experimenting, and that's an honest figure, I kept track of my time so far.I need to run an inside server on our inside network but have the outside be able to reach i...
Sorry if this is the wrong area, we have so seldom had questions that were not otherwise handled I don't frequent this area.How difficult is it to change the interface used for active/standby failover? It's a working, already configured pair with sta...
My minor project to check and fix configuration problems or inconsistencies has grown to major proportions. I've gotten past the transform-set questions and a few other odds and ends through comparing our ASA5505 configurations with each other and re...
Greetings - I was sort of a backup person or I guess "apprentice" to our network administrator who recently retired. Same story, guess who is now tasked with figuring it all out.We have a pair of 5510s in the main office, the second is a "fail-over" ...
Well, you nailed it again. I did find a little feature in the ASDM that is called "public server". It appeared to be similar to what I wanted to do.I followed what you advised there, but experimented in the ASDM as well and found that it matched what...
If there was a "smack-self-on-forehead" icon here I'd use it now.Of course, totally logical - if you disconnect a monitored connection on the standby it's not about to take over as primary because it's had a failure and can't do the job, forcing the ...
This is a big help. I always did "sh run" and then copied it all into QWINED editor and removed the extraneous lines from the paging, replaced the hashes and so on. Besides answers to my original novice questions your tips will save me time.I have us...
First, a big thank you for the quick response - and one I mostly understand. I was thinking more like "stuck with" and not "control", but it's not really that bad. As of 3 weeks ago I'm it and do have full control over both ends but that means I have...
