Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Ok so here is the issueI have a XP workstation behind my ASA that can not connect to a client's network via Cisco VPN Client using IPSec...In the logs it shows the translation is working on 500 but the VPN Client has the error 412, that the client is...
I have a Windows 2003 server running a L2TP VPN server on it. I'm putting theASA5505 in replacement of an opensource firewall.My question is that, I can't seem to forward the ports correctly for L2TP to the internal address of the 2k3 VPN server. It ...
Prefix....I'm new to Cisco equipment much more familiar w/ Sonicwall w/ that said......I have a 5505 w/ Security Plus licensingI have set up multiple VLANs as followsVLAN 1 inside - still setup as 192.168.1.1 (will not be using this for our lan)VLAN2...
I've cleaned up the config see below....still no luck on getting out though...hostname RWFW1enable password LK7cutC9mBxkCKRd encryptedpasswd LK7cutC9mBxkCKRd encryptednames!interface Vlan1 nameif inside security-level 100 ip address 192.168.1.1 255.2...
Saikiran Nair, I've updated my config and still seem to be having a problem, the updated config is below please let know me know where I'm going wrong, and thanks to everyone who has been helping. hostname RWFW1enable passwordpasswd !interface V...
I'm unable to add the followingpolicy-map global_policyclass inspection_defaultinspect ipsec-pass-thruwhen i'm at the prompt belowRWFW1(config-pmap)# class inspection_RWFW1(config)# class inspection_defaultRWFW1(config-cmap)# inspect ipsec-pass-thru...
