Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
version 17.15.4Controller WMI use vlan100VLAN 20 GW is on the fortigateWhen I have the ssid use vlan 20,ap is flexmode ,SSID Centeral switching and DHCP,I haven't the ip,I discovered that the controller sends the source IP address of the SVI 20 Inter...
I have to study SD-WAN and Start install by ova in vmware,I have the same quesion for SD-WAN Version martrixIn the cisco doc,recommand vManage 、vSmart and vBond version the same,but in the upgrade status the version is not the same,How can I look for...
The 9800 P2P Block default is DisableI create the SSID(Security is OPEN),1.Whe ap is local mode Client can't ping by the same ssid ,but the flex mode is ok2.The same configure in AIR-OS is running
Internet_SW#show ip routeCodes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGPD - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter areaN1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2E1 - OSPF external type 1, E...
