Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All, I have ask a lot experts how to make a "DHCP Spoofing on a Cisco router". Speetouch can do that, but nobody does now how to make this on an Cisco Router. Goal must be "Send public ip-adres to Cisco Firewall". I hope somebody have complete thi...
Hello Everybody,Do somebody now how to configure the ASA 5500 with "Directed Broadcast" for Wake of lan from other networksegment. we want pass traffic from 192.168.10.0 network to 192.168.100.0 DMZ Network to turn on the server with Wake on Lan.I re...
I have a cisco 827 and have make a static ip nat for intern webserver from the internet. This works great but if i want make a connection from my inside network to the webserver on the inside netwerk it doenst work. - I have no intern DNS server- Sli...
I have a problem with ip inspect on a C 827 router. When i want make a connection to outbound it can not make a session with ip inspect firewall. When is use the command sh ip inspect session i don`t see details. If i disable access-list then everyth...
I have a question about a excepion of traffic of the lan. I have set aan access-list al follwing:BVI 1ip address dhcp (Public ip adddres dhcp)ip access-list 100 in---------------------------------access-list 100 permit tcp any host PUB_IP eq wwwIf ho...
I have make some test. When i do a telnet with ip-adres then works everything good. The problemen is with dns resolve and ip inspect. I have add# ip name-server X.X.X.X but is does helping. I hope somebody can help.
Thanks for the answher. You can use dynamic ip-adres with NAT translation. I do wrong check. If i check is everything work of the inside network (Does work). If i make a vpn en check the static nat from extern it work fine. Thanks for the tips maby i...
Thanks for the answher. You can use dynamic ip-adres with NAT translation. I do wrong check. If i check is everything work of the inside network (Does work). If i make a vpn en check the static nat from extern it work fine. Thanks for the tips maby i...
If i make a configuration with a static ip-address then i can not ping the gateway of my ISP. With DHCP works everything correct. Is there some reason why static ip don`t work?
