Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a PIX 515E which is connected to three networks. The first network is the LAN, the second network is the DMZ and the third network is the outside. I have a web server in the DMZ which I am trying to back up using an ArcServe server on the LA...
Our current setup, which is being used until I get the new hardware working, is such that we have two routers with the internal router providing NAT and static routes to specific inside servers such as the web server and the mail server. No DMZ, jus...
Thanks much for your reply.It would appear that the problem lay with the duplex that was set on the firewall. I changed it from full to half and the speed increase of a file transfer was 100-fold. I yet have to see the result of a backup run across...
Is this the case for ICMP redirects or all redirects?I seem to be in a similar situation where I have a router on my inside network which routes to a subnet. I have added a route to the PIX as such:route 1The PIX itself can now ping the subnet on...
Thanks for the reply. At this point I am testing with IIS 5.0 SMTP. I am however unable to figure out how to pass/relay email into the inside network. I am not sure how I could let the relay server know where the actual mail server is located.Rodn...
