About Jorge Juan Moreno Valencia

Jorge Juan Moreno Valencia · 07-21-2016

Hello,I need to setup to VLAN inside a network.I have a network with this gateway 144.146.18.1, a DNS server 144.146.18.14 and a mask 255.255.0.0IPs are assigned via DHCP.And I need to connect a PLC which has a default gateway like this 192.168.0.200...

Jorge Juan Moreno Valencia · 08-03-2016

I finally did NAT to that IP and it is working. Thank you for your support.

Jorge Juan Moreno Valencia · 08-01-2016

So, I have a Cisco 800 Series Router. A firewall connected to that Router and all the servers, switches connected to that firewall. Your suggestion is to connect PLC directly to that router? Also, I will have to change Router IP address to 192.168.0....

Jorge Juan Moreno Valencia · 08-01-2016

Hello, I have a complete network working (servers, desktops,switches, hubs...) under Star Topology. Gateway is 144.146.18.1, DNS Server is 144.146.18.14 and IPs are automatically assigned by DHCP server from 144.146.18.50 to 144.146.18.200 And I hav...

Jorge Juan Moreno Valencia · 07-28-2016

So I have to NAT the PLC on the router. And do I have to create the second VLAN?

Jorge Juan Moreno Valencia · 07-28-2016

I have the switches running and I have the PLC without connection.

Member Since	‎07-21-2016 09:49 AM
Date Last Visited	‎08-18-2017 03:55 AM
Posts	8

User Statistics

User Activity

Configuring 2 VLAN with different Gateways

I finally did NAT to that IP

So, I have a Cisco 800 Series

Hello,

So I have to NAT the PLC on

I have the switches running