Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi alli have created a lab from 2 VTEPS and 1 SPINE , 2 VRFS company 1 and company 2 , i wanted to route leak 10.20.0.0/24 from Company 2 to Company 1 , i did the import on the VRF of the Company 2 on LEAF2 and i was able to see 10.20.0.0/24 shows in...
Found the solution , route-target import required the EVPN command at the end , route-target only concerned ipv4 unicast routes vrf context Company1vni 1040rd 65000:1040address-family ipv4 unicastroute-target import 65000:1030route-target import 650...
Yes with a spine , The route though is received on LEAF2 from LEAF 1 , and it added correctly to the correct vrf based on the rd *>l[5]:[0]:[0]:[24]:[10.21.0.0]/2241.1.1.1 0 100 32768 ? but it never leaks to the other vrf , i am also suggesting its a...
Hello MHMRoute leaks from VRF1 to VRF2 on leaf 2 works fine for subnets that on leaf 2 , Routes learned from a neighbor leaf for VRF1 are added without any issues to VRF1 in the second leaf , but never show up in VRF2 allowas in , i dont have a neigh...
